Brake Repair

Brakes are one of those things that most people don’t think about until they are brought to attention. Whether you heard squealing when approaching a stop sign, or noticed grinding noises at a red light, scheduling a brake inspection is vital in avoiding hazardous driving conditions and costly repairs. Brakes are something we rely on most in our vehicles and knowing the condition of them should be incorporated in your routine maintenance plan. Let our knowledgeable technicians assess the state of your brakes and come up with a solution so you can be confident in the repair or replacement process. Even if your brakes are in good condition and need little maintenance, our team is happy to inspect and let you know. Why wait when you can have peace of mind? Schedule your brake repair inspection today!

Brake Inspection

Routine inspections are key for monitoring your brakes’ condition, identifying possible issues before they can cause costly damage.

Brake Rotor Replacement

Regular wear and tear can impact the effectiveness of your brake rotors. Without regular maintenance, rotors can crack or incur other damage.

Front Disk Brake Repair

Front brakes are responsible for the majority of your vehicle’s stopping power, causing them to wear out more quickly. Ignoring front brake maintenance can lead to further damage and unsafe driving conditions.

Parking Brake Adjustment

A loose or improperly tensioned parking brake cable or damage to other components can lead to a faulty or non-functioning parking brake.

Rear Disk Brake Repair

Regular use leads to wear on the brakes. Failure to replace worn brakes regularly can cause damage to other components and creates unsafe driving conditions.

Rear Drum Brake Repair

Wear and tear is expected with regular vehicle use. Rapid or excessive wear can be signs of more extensive damage. Regular maintenance is essential for safe operation and driving conditions.

GreasePro proudly serves Lynn Haven, Callaway, Panama City, Panama City Beach and Chipley areas. We offer the best services with trained industry professionals with years of experience who you can trust to repair your brakes. Visit one of our many convenient locations near you or schedule a service that works with your time on our website.

Frequently Asked Questions

What’s the typical cost to replace brake pads and rotors at Grease Pro?

The cost of replacing brake pads and rotors can vary widely depending on your vehicle’s make and model. For the most accurate estimate, we invite you to contact our team at Grease Pro directly.

Could you guide me on how to add brake fluid?

Adding brake fluid starts with locating the brake fluid reservoir in your engine compartment. After removing the cap, you can top off the fluid. Be careful not to overfill, and make sure you’re using the correct type of brake fluid for your vehicle. If you’re uncertain or uncomfortable performing this task, our professionals at Grease Pro are here to help.

What does a brake fluid flush typically cost?

The cost of a brake fluid flush can vary based on your vehicle’s specifications. To give you an accurate price, we recommend getting in touch with our team at Grease Pro.

How long does it typically take to change brake pads?

The time it takes to change brake pads can depend on various factors, but usually, it takes about one to two hours per axle. At Grease Pro, we strive to provide efficient and quality service to get you back on the road as soon as possible.

How long do brake pads and rotors usually last?

On average, brake pads should be replaced every 50,000 miles, while rotors should be replaced every 70,000 miles. However, these numbers can vary greatly depending on your vehicle and driving habits. Regular inspections, like the ones we provide at Grease Pro, can help ensure your brakes are always in good condition.

I hear a grinding noise when I brake. What could be causing that?

A grinding noise during braking often indicates that the brake pads are worn down and need to be replaced. If left unchecked, this could cause further damage to your brake system. We recommend having your brakes inspected at Grease Pro as soon as possible.

Is it possible for me to change my brake pads on my own?

While it’s technically possible to change your own brake pads, it requires some technical knowledge and the right tools. For safety and assurance, we recommend having this service performed by professional technicians.

How can I check my brakes without taking off the wheels?

You can often hear or feel signs of brake problems (like squeaking, grinding, or reduced braking power) without removing the wheels. However, for a comprehensive check, the wheels usually need to be removed. At Grease Pro, we can perform a thorough inspection of your brakes to ensure they’re in good working order.

Why am I hearing a noise when braking at low speeds?

Hearing noise when braking at low speeds can be a sign of worn brake pads or rotors, or possibly a foreign object in the brake system. It’s best to have your brakes inspected at Grease Pro to determine the cause and get it fixed promptly.

Find Nearest Location

With 12 locations, there's always one close by to service your Brake Repair needs.